Zirconium ntride is a hard ceramic material similar to titanium nitride

Byadmin

Aug 19, 2023

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



What is zirconium-nitride (ZnN)? The zirconium-nitride, with its chemical formula ZrN, has a high level of corrosion resistance. It also has a good degree of hardness, lubricity, and ductility. This coating is attractive due to its many properties. It is applied using physical vapor deposit. The coating can be in the form a yellow crystalline dust or an attractive golden light coating.

Zirconium nitride has a physical and chemical property of a density (7.09), a microhardness (about 980019600MPa) and a melt point of 2980 degrees plus or minus fifty). Zirconium is insoluble, slightly soluble, in organic acid. However, it can be dissolved in hydrofluoric and concentrated sulfuric acids. Zirconium (ZrN), because of its properties, can be used in a wide variety of applications.

ZrN deposited by PVD is a light golden color, similar to that of elemental Gold. ZrN has a resistivity of 12.0mO*cm at room temperature, a temperature coefficient resistivity of 5.6*10-8O*cm/K and a superconducting threshold temperature of 10.4K. The relaxation lattice parameters is 0.4575nm. The elastic modulus and hardness are 450 GPa.
What is zirconium-nitride used for?
Zirconium Nitride is a hard ceramic similar to titanium Nitride and a cement like refractory. This material can be used to make refractory materials as well as laboratory crucibles, cermets or crucibles. Physical vapor deposition is used as a coating method for medical equipment, industrial components (especially drill bits), aerospace and automotive parts, and parts that are subject to corrosive and high-wear environments. In the case of alloying ZrN with Al, electronic structure is developed from the local bond symmetry octahedral. As the Al concentration increases, this symmetry is distorted and becomes more complex, with a higher degree of hardness.
For rockets, zirconium-nitride is recommended for the lining of hydrogen peroxide fuel tanks in airplanes and rockets.

Zirconium Nitride (ZrN) compounds are composed of different crystal structures. These vary depending on their composition. ZrN is an alloy compound that has been discovered in the ZrN system. Not only do they have excellent chemical characteristics, but they can also be used in junctions, diffusion laminations, low temperature instruments, etc. These compounds can be used in three-dimensional integrated electronic coils as well as metal-based semiconductor transistors. The ZrN compounds have superior wear resistance to pure zirconium, as well as oxidation, corrosion and wear resistance. In addition, they have a greater superconducting threshold temperature.

Preparation and use of zirconium powder
The main processes for the synthesis of zirconium oxide powder include direct nitridation using nitrogen on Zr metals, high energy reactive ball milling with microwave plasma, benzene-thermal method, aluminum reduction, magnesium thermal, carbothermal, reduction nitriding (CRN), direct thermal carbon nitriding zirconia, zircon, and other CN and CRN processes. There are suitable routes for different sizes and particle shapes. The mass production of Zirconium Nitride and other Transition Metal Nitrides is possible. It should be noted, that due to the formation solid solution in the ZrNZrCZrO’ system, the final nitriding product in CRN/CN is represented by this formula Zr N C O. It is necessary to perform a CRN two-step process. The nitrite is converted from zirconium carburide (ZrC), which was produced earlier as an intermediate. The CN method is the direct nitridation ZrO2 with carbon and requires only one heat-treatment. It is possible that the latter method can be more time-efficient and energy-efficient in producing zirconium-nitride.

In oxygen reduction, zirconium nitride surpasses platinum
Pt-based materials play an important role in microelectronics, anti-cancer medicines, automotive catalysts, and electrochemical energy-conversion equipment. Pt, the most common catalyst for oxygen reduction reactions (ORR), is used in fuel cell and metal-air battery applications. Its toxicity, scarcity, and cost limit its potential use. In this study, we demonstrate that nanoparticle zirconium (ZrN), a catalyst used in ORRs in alkaline environment, can replace or exceed Pt. The synthesized ZrN (nanoparticles) exhibit high oxygen-reduction performance, and are as active as the commonly used commercial catalyst Pt/C. Both materials show the same half wave potential (E1/2 = 0.80 V), after 1000 ORR cycle, and ZrN shows a greater stability than Pt/C catalyst (DE1/2 than = 3 mV). In 0.1 M KOH. ZrN is also more efficient and has higher cycles in zinc-air battery than Pt/C. ZrN replacing Pt may lower costs and encourage the use electrochemical energy devices. ZrN could also be useful in catalytic systems.
Enhanced Photoluminescence Combined with a Periodic array of Organic Dyes and Zirconium Nitride Nanoparticles
Due to their excellent optical properties, noble metals like gold have been used in plasma technology. The melting temperature of gold, particularly in nanoscale, is relatively low. These limitations in material are a barrier to the use of plasmons for multiple applications. Transition metal nitrides are promising substitutes for conventional materials because of their high mechanical and thermo-mechanical stability, and also acceptable plasma properties in the visible range. Zirconium (ZrN), a promising material substitute, has a carrier density higher than titanium (TiN), the gold Supplementary material most studied. In this research, we made a periodic ZrN-nanoparticle array and found out that the ZrN array increased the photoluminescence in the organic dyes. This photoluminescence was 9.7 times stronger when viewed under visible light. The experiments confirmed that ZrN is a good alternative to gold for further developing plasmons, and relieving the limitations of conventional materials.

(aka. Technology Co. Ltd., a trusted global chemical supplier & manufacturer has been providing high-quality Nanomaterials and chemicals for over 12 Years. Our company is currently developing a number of materials. Our company produces zirconium-nitride with high purity and fine particle size. Click the desired products or send us an e-mail. Send an inquiry .