If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net
Zirconium-hydride is a chemical formula ZrH2. It has a density of 5.6g/cm3, melts before being decomposed, and generates heat of 39.7kcal/mol. It is prepared in the same way as titanium hydride.
Purity: 99%
Particle Size: 325mesh
Zirconium Hydride powder ZrH2
ZrH2 is the hydride zirconium. Its density is 5.6g/cm3. After melting, heat 39.7kcal/mol forms. You prepare it with titanium hydrogenated. This temperature is often 900 ° C. You can dilute zirconium hydrofluoric or ethanol in it. These compounds have had a very bad reaction to water, acid, oxidant, and/or halogenated substances.
A stable liquid, zirconium hydrofluoride fluid is also stable. The air and water can be stable in normal conditions. Although zirconium is susceptible to strong acidic and oxidizing chemicals, it can easily burn at low temperatures and completely dissolve in the vacuum between 300 and 700 °C.
L. zirconium hydroide shows an alloy that is bonded to zirconium, hydrogen. Hydrogen can be used as a hardening ingredient to avoid dislocations in zirconia’s atomic lattices. You can control the hardness, durability, and strength of the resulting hydrogen by altering the hydrogen/hydride ratio (precipitation phase). Zirconium hydride ZrH2 powder can have a higher hydrogen content, making it stronger and harder than zirconium.
Zirconium Hydride Powder CAS 7704-99-6:
The powder can be used in normal circumstances to keep it stable. It can react violently to strong acids or oxidants. After ignition, it burns smooth and starts to decay at 300° C in a vacuum. Then, at 500-700° C, the entire process begins.
How Zirconium Hyide ZrH2 Pulver is produced?
This metal reacts with hydrogen to create zirconium hydrochloride. The purity of the sponge metallic zirconium was 99.8%. It was heated to high-purity hydrogen (99.999%) at 400 to 600 °C. This reaction, which is zirconium hydrogen liquid, took place immediately. It is an exothermic reaction. It can occur even at room temperatures. Uniform integral hydrogenation can usually be achieved through annealing for between a few hours and several weeks at temperatures between 400-600 ° C. Zirconium hydrogenide, which is found in air at room temperature and even in high vacuum, can be quickly oxidized. It is possible to ignore oxidation effects caused by the formation of a nano-thin oxide coating. You can also reduce zirconium oxide at 600 ° C using a hydrogen stream to make zirconium hydroide.
Zirconiumhydride ZrH2 Pulver:
The pure zirconium hydroide is a powder that can be used to hydrogenate metals in powdermetallurgy and used as an absorbent within the vacuum tube industry. Zirconium hydroide can be used in vacuum systems to create a barrier between ceramics and metals.
For industrial purposes, zirconium hydroide can be used to make fireworks, flux, and other ingredients.
ZrH2 has many uses in powder metal metallurgy. Another use is as a fuel, or fireworks explosions.
Zirconium Hydride is an effective reducing agent. As an additive, you can use it. It is possible to prepare desoxicides or desulfurization substances at the same time as iron alloy.
Mixing nitride and carbonized calcium carbon dioxide can create a metallic coating.
Because ceramics are susceptible to infiltration, zirconium serves as an adhesive metal-ceramic for ceramic tubes and devices.
Zirconium hydroide can be used to reduce neutrons and as an atomic energy station material or as a suction agent.
Zirconium Hydroide ZrH2 Pulver Storage:
Wet reunions can adversely affect ZrH2’s dispersion and usage effects. Zirconiumhydride ZrH2 should be stored in vacuum bags and kept dry. Additionally, ZrH2 powder must be kept away from stress.
Shipping and Packing of Zirconium Hydroide ZrH2 powder:
We offer many packing options that are dependent on the amount of Zirconium Hydroide ZrH2 powder.
Zirconium Hydride ZrH2 Powder packaging:vacuum packing 100g to 500g or one kg/bag 25kg/barrel and as per your request
Zirconium Hydride ZrH2 Pulp shipping: Could be shipped by sea, air or express as soon after receipt of payment.
Zirconium Hydride ZrH2 Powder Properties
Zirconium(II) hydride, Dihydridozirconium, zirconium(2+) dihydride, ZrHx, ZrH, CAS 15457-96-2 (ZrH4), CAS 13940-37-9 (ZrH), zirconium-hydrogen alloy
7704-99-6
ZrH2
Molecular Weigh
93.24
Appearance
Dark grey to dark powder
Melting Point
N/A
Solubility water
N/A
Density
5.56 g/cm3
Purity
99.00%
325mesh
Boling points
N/A
Specified Heat
N/A
Heating Conductivity
N/A
Thermal Expansion
N/A
Young’s Module
N/A
Exact
91.920354
Monoisotopic Weight
91.920354 D
Zirconiumhydride ZrH2 Pulp Safety & Health Information
